Medidor Transistor Tester Triode Diodo Capacitância Digital V2.68 Mos Pnp Npn Lcr Lcd Testador de Tela Mega328

Opção de Compra e tempo de entrega

Mega328 Meter Transistor Tester Diode Triode Capacitance Digital V2.68 MOS/PNP/NPN LCR LCD Screen Tester

1. Digital V2.68 Mos Pnp Npn Lcr Lcd Testador de Tela – Condição : New

The latest M328 version of the software ,more functions.Chip: Atmega328

128*64 big Backlight LCD display,only 2mA when stand by.

Using 9V battery (Not included)

Test ranges:

Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube ,

Resistance,Adjustable potentiometer

Resistance :0.1 ohm resolution, maximum 50M ohm

Capacitor :25pf -100,000 uf

Inductors : 0.01mh-20H

Function:

1:Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET,

diode (including double diode), thyristor, transistor, resistor and capacitor and other components

2: Automatic test the pin of a component, and display on the LCD

3:Can detect the transistor, MOSFET protection diode amplification coefficient

and the base to determine the emitter transistor forward biased voltage

4: Measure the gate and gate capacitance of the MOSFET threshold voltage

5:Use 12864 liquid crystal display with green backlight

Specifications: For you reference

1,One -button operation, automatic shutdown .

2,Only 20nA shutdown current.

3,Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET,

JFET , diodes , two diodes, thyristors small power unidirectional and bidirectional thyristor.

4,Automatic identification components pin arrangement .

5,Measuring bipolar transistor current amplification factor and base – emitter threshold voltage.

6,Via the base – emitter threshold voltage and high current amplification factor to identify Darlington transistors.

7,Can detect bipolar transistors and MOS transistors protection diodes.

8,Measuring the gate MOS FET threshold voltage and the gate capacitance.

9,Can simultaneously measure two resistors and resistor symbol is displayed.

Displayed on the right with a decimal value of 4 .

Resistance symbol on both sides shows the pin number.

So you can measure the potentiometer.

If the potentiometer wiper is not transferred to an extreme position ,

we can distinguish the middle and both ends of the pin.

10,Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .

11,Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF.

12.2uF more capacitors can simultaneously measure the equivalent series resistance values.

The two can be displayed with a decimal value , resolution 0.01 ohms.

13,Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.

14.LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.

15,Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.

16,Can measure a single diode reverse capacitance.

If the bipolar transistor connected to the base and collector or emitter of a pin ,

it can measure the collector or emitter junction reverse capacitance .

18.can be obtained with a single measurement rectifier bridge connection.

Notice:

Before measuring capacitance , the capacitor must be discharged , otherwise very likely damage the meter .The screen is not fixed

Package Included:

1PCS * Mega328 Transistor Tester

2. High Quality Ferramenta – Idade : Adult

3. Multímetros – Idioma : English

4. Mega328 Medidor Transistor Tester Triode Diodo Capacitância – Ano de Publicação : 1950-1999

5. Cheap Multímetros – Encadernação : Encadernação Afinada

6. Digital V2.68 Mos Pnp Npn Lcr Lcd Testador de Tela – Formato : Não Especificado

7. High Quality Ferramenta – Origem : cn Origem

8. Multímetros – Condição : New

LCR-T4-TINY

Features:

1. Powered by 6F22 9v battery.

2. Ultra-small LCD, delicate display.

3. Automatic identification of pin order, fool test.

4. Using a new generation of chips, more powerful.

5. The key components adopt high precision to ensure the test accuracy.

6. Using 12864LCD graphic display, intuitive information, information content is large.

7. 2*4 test seat and SMD component test area, in-line and SMD component testing is convenient and fast.

8. Ultra-low power consumption, the power consumption is only 21ma, and the standby current is only 20na, which can be used for a long time.

Explanation:

This tester has stable performance, can automatically read accurate data, and is easy to use. It is suitable for electronic enthusiasts, electronic developers, designers, and electronic maintenance personnel. The necessary small instruments. It can measure all kinds of resistance, capacitance, inductance, diode, triode, thyristor, MOS field effect transistor; it can judge the device type, the polarity of the pin, the output HFE, the valve voltage, and the junction capacitance of the field effect transistor. It is especially suitable for transistor pairing and identification of mixed surface mount components, and it is also the best partner for amateur DIY.

Specification:

Standby current: 0.02uA

Battery type: 6F22 / voltage 9V

Working power supply: DV=9V

LCD size: 24.16mm*35.66mm

Backlight Color: White Backlight

Display screen: 1.4 inch 12864LCD

Relative humidity: non-condensing <10°C

Working current: typical working current 21mA

Temperature: Operation: 0~40? Storage: -10~60?

Main function:

1. Measure the threshold voltage Vt and gate capacitance C of the MOSFET.

2. Only one measurement is needed to find out the connection of the full bridge.

3. Automatically detect the pin layout and give the label according to the actual sequence.

4. For bipolar transistors, MOSFET protection diode detection and forward voltage drop Uf.

5. The maximum capacitance test is 1000000uf, and the best test range is 0.2nF~7000uF.

6. Darlington transistors can be identified by high threshold voltage and high current amplification factor.

7. Be sure to discharge the capacitor before testing the capacitor, otherwise the tester will be burned.

8. Types of power devices and amplifiers, transformers, etc. are not allowed to be tested or cannot be tested.

9. Zener diodes can be tested, if the reverse breakdown voltage is lower than 4.5V it will show as two diodes.

10. The resolution of resistance measurement is 0.1 ohm, and the highest measurement value is 50M ohm.

11. It is possible to display the symbol of the correct direction for both diodes and to display the forward voltage drop.

12. Automatically shut down, after the test, the test result will always be displayed for about 25 seconds, and then shut down.

13. One key to start and test, automatically identify the device type, automatically switch the range, and automatically shut down after the test.

14. Measure the current amplification factor ß of the bipolar transistor, the threshold voltage of the emitter junction, and the ICE leakage current.

15. The test time is about two seconds, and the measurement time of bulk capacitance and inductance will be extended with the actual value.

16. The standby current is as small as 20na, and the standby power is negligible for long standby time, and the battery can be used for power supply.

17. Detect and determine the forward voltage of the emitter transistor and the magnification and base of the transistor and MOSFET protection diode.

18. The LED is detected as a diode, it will flash several times continuously during the test, and the double light-emitting diode is detected as a double diode.

19. The equivalent series resistance (ESR) capacitance value of capacitors above 2UF can be measured with a resolution of 0.01 ohms and a two-digit value displayed.

20. The capacitance value of the reverse of a single diode can be measured. Bipolar transistors can also be measured. At this time, the base and collector or emitter must be connected.

21. The highest four digits of the capacitance are displayed, and the capacitance value ranges from 25pf (8MHz clock, 50pF@1MHz clock) to 100mF. Resolution up to 1pF (@8MHz clock).

22. Automatically detect PNP and NPN type bipolar transistors, N, P channel MOSFET, JFET, diode, double diode, thyristor thyristor (thyristor), triode, resistor, capacitor, capacitor ESR value.

23. The inductance test range is: 0.01mH~20H, more than 20H, resistance below 2100 ohms will be recognized as inductance, the measurement result only shows a single inductance, and the inductance value is displayed.

24. Support simultaneous measurement and symbol display of two resistances. Both ends of the displayed resistance symbol are the connected tester probe numbers (1-3), and the adjustable potentiometer can also be measured.

Note:

Tear off the screen protector before use for a better display!

Discharge before use! Be sure to discharge the capacitor before the capacitor test, otherwise there will be a danger of burning the machine, and the damage will be at your own risk!

Contrast adjustment method:

After the test result is displayed on the screen, double-click the button to adjust the number displayed in the center of the screen. At this time, single-press the button, the corresponding value will increase, and double-click to save when satisfied. (The reference value is 23-28 is the best)

Shipping list:

Transistor Tester X1

9. Mega328 Medidor Transistor Tester Triode Diodo Capacitância – Idade : Adult

10. Cheap Multímetros – Idioma : English

11. Digital V2.68 Mos Pnp Npn Lcr Lcd Testador de Tela – Ano de Publicação : 1950-1999

12. High Quality Ferramenta – Encadernação : Encadernação Afinada

13. Multímetros – Formato : Não Especificado

14. Mega328 Medidor Transistor Tester Triode Diodo Capacitância – Origem : cn Origem