Acessórios e Máquinas Ferramenta

Vídeo de Demonstração do Produto

Opção de Compra e tempo de entrega

Aviso Para mais informações sobre esse produto com preço promocionais e forma de entrega, click no botão abaixo e visite o portal da loja

Ficha técnica do produto

Características	Especificações
Número do Modelo	Diy0
Origem	CN (origem)

1. Mais Novo v5 Anti-rolo 3d Toque Ponta

2. Maquinário e Acessórios

mais novo toque ponta de prova finder alinhamento desktop cnc sonda compatível com grbl

Precautions:

1. Need to turn on axis speed
Never never never.
Don’t laugh, there are such users.

2 How to distinguish the three strands
The red wire is vcc, the black wire is gnd, and the white wire is io.

3. Why is the concentricity different each time the probe is installed
Because your mandrel spring clip er cannot guarantee 100% straightness. Every time the probe is installed, even if the concentricity is set to 1 wire, there will still be deviations when the probe is removed and re-installed. So your chuck is better to buy aaa and above precision (concentricity <= 0.005), because many chucks in china have false patterns, it is recommended to use a high precision gauge or tungsten steel rod to check the table after installing the chuck. Look for concentricity. It is best to place the dial indicator at a distance of 50mm from the chuck, which is approximately the distance between the head of our probe ball and the root of the tool handle. 4. Why am I obviously aaa chuck, and the concentricity is still poor
This is because you purchased a virtual chuck sticker.
Under normal circumstances, if the shaft jumps by 0.01, the aaa chuck tightens the milling cutter and table tool holder, the error may not exceed 0.02, and the error may not exceed 0.03 at the maximum. There will be a slight angular deviation between the center axis of the rim chuck and the center axis of the axle axis, which will be enlarged by the length of your tool holder. Normally you use a calibration gauge to measure the root of a milling cutter, and you may not see a big error, but because the probe’s stylus is about 50mm away from the tool holder, the error will be magnified even further . So be sure to choose genuine high precision chucks, which is nothing more than a tens of dollars price difference.